TI-300 Service and Workover Unit

Description
The TI-300 is a compact service and light workover rig for depths up to 8,500 ft. (2,591 m). This rig is ultra compact in design for maximum maneuverability and performance. The 71 ft. (21.6 m) mast provides 150,000 lbs. (68 MT) hook load with a four-line string. The rig can be equipped with conventional band or disc brake drawworks. The self-propelled unit is mounted on a short wheelbase 4-axle custom carrier and powered by a deck mounted 415 Hp diesel engine and automatic transmission. The TI-300 unit comes standard with all of the most desirable features, and can be further customized to fit your needs.

Drawworks
Model.......................... TI-248 (Disc) or DD42 (Band)
Single Line Pull..........................................38,000 lbs.
Hoisting Drum Information
Main Barrel Dimensions.................. 18.75 in. x 34 in.
Wire Line Size....................................................7/8 in.
Wire Line (included).........................................550 ft.
Drum Clutch...........................................14 in. 3-Plate
Gearing.....................................6 Forward / 1 Reverse
Drive Chain................................................. Single 140
Brake System.......Single 48 in. Disc or 42 x 12 blocks
Brake Cooling..........................................................Air
Sand Drum Information
Sand Drum Diameter.................................... 12.75 in.
Standard Sand Line Size.................................9/16 in.
Sand Line.....................................................12,000 ft.
Drive Chain................................................. Single 140
Brake System......... Single 48 in. Disc or 42 x 8 blocks
Brake Cooling..........................................................Air

Mast
Model.............................................................. 71/150
Mast Height........................................................ 71 ft.
No. of Lines to the Block............................................4
API Capacity............................................150,000 lbs.
Drill Line Size.....................................................7/8 in.
Racking Board Height...............................25 ft. 10 in.
Rod Basket Height......................................53 ft. 8 in.
Traveling Block (included)................................75 ton
Mast Raising System
Raising Rams..................... 1-3 Stage, Double Acting
Telescoping Ram............................... (1) Single Stage
Guy lines (included).....(2) with Racheting Boomers
Wind Guys (included)............(1) Set with Tail Chains
Tubing Board Guys.................(1) Set with Tail Chains

Power System
Engine................................................Caterpillar C-13
Cylinders / Type........................................6 / 4-Stroke
Horsepower......................................................415 Hp
Governed Speed.........................................2,100 RPM
Air Cleaner......................................................Dry Type
Emergency Stop............................................Standard
Transmission
Gearing.....................................5 Forward / 1 Reverse

Air Electrical & Hydraulic
Compressor..................................................... 27 CFM
Electric System................................................. 12 Volt
Alternator......................................................115 amp
Starter.............................................................. 12 Volt
Batteries..................................................... (3) BCI-31
Hydraulic System......................... 50 gpm / 2,000 psi

Cab
Type..................................Single Person (R of L drive)
Heater / Defroster.....................................40,000 BTU
Driver Seat.......................................................Air Ride
Mirrors...............................................West Coast Style

RIg Leveling System
Leveling Jacks..(4) 48 in. Hyd. with Manual Back-up

Carrier
Type...................................................4 axle, 8x4 drive
Length w/ Mast..........................................42 ft. 5 in.
Overhang, front............................................. 6 ft. 4 in.
Axle to Bumper..................................................... 5 ft.
Rear Axle Spacing.............................................. 54 in.
Rear Axle to Back of Rig..............................11 ft. 8 in.
Height (OTR).............................................13 ft. 10 in.
Estimated Rig Weight................................73,640 lbs.

Axles-Suspension
Front.............................................Tandem / Steerable
Axle Capacity...............................20,000 lbs. per axle
Suspension Type................................................Spring
Rear................................................................ Tandem
Axle Capacity.............................................23,000 lbs.
Drive Ratio......................................................... 4.11:1
Brakes
ABS System.......................................Standard- Drum
Emergency Brake....................................................Air
Tires & Wheels
Front Tires.........................................425/65 R22.5 in.
Front Wheels.......................................13 in. / 22.5 in.
Rear Tires............................................... 11R x 22.5 in.
Rear Wheels..........................................8 in. / 22.5 in.
Frame
Main Rails........................................21 in. 53 lbs. / ft.
Frame Deck...........................3/16 in. Diamond Plate
Tow Points............................................Front and Rear
Front Bumper.............................................. Slant Type
Paint
Standard Paint..........................2 Non-Metallic Colors

Download PDF file:
Service and Workover Unit TI-300