Unit TI-500 Service and Workover

Description
The TI-500 is one of the most popular rigs manufactured by Taylor Industries. The 104 ft. (31.7 m) / 225,000 lb. (102 MT)
mast makes this unit a serious rig for heavy well service, workover, and light drilling. Mounted on a heavy duty 5-axle carrier, the standard 500 Series is powered by one 475 Hp engine and an automatic transmission. All critical maintenance points are easily accessed and brake adjustment is simple and clear. The rig is equipped with many standard features including rod basket, tubing board, work platform, deck mounted winch, block, sand & tubing line, and numerous others. The TI-500 is as versatile as it is durable.

Drawworks
Model.................. TI-260 (Disc) or DD42-154 (Band)
Single Line Pull..........................................41,500 lbs.
Hoisting Drum Information
Main Barrel Dimensions.................. 18.75 in. x 34 in.
Wire Line Size........................................................1 in.
Wire Line...........................................................675 ft.
Drum Clutch...........................................18 in. 3-Plate
Gearing.....................................6 Forward / 1 Reverse
Drive Chain................................................Double 160
Brake System............Dual 60 in. disc / 42 x 12 blocks
Brake Cooling.............................................Air/ Splash
Sand Drum Information
Sand Drum Diameter.................................... 12.75 in.
Standard Sand Line Size.................................9/16 in.
Sand Line (included)...................................16,000 ft.
Drive Chain................................................. Single 140
Brake System..............Single 48 in. Disc/ 42x8 blocks
Brake Cooling............................................. Air/Splash

Mast
Model............................................................ 104/225
Mast Height......................................................104 ft.
No. of Lines to the Block............................... 4, 6, or 8
API Capacity............................................ 240,000 lbs.
Drill Line Size.........................................................1 in.
Racking Board Height.............55 ft. 7 in. / 66 ft. 7 in.
Rod Basket Height......................................78 ft. 7 in.
Traveling Block................150 ton 83A non-weighted
Mast Raising System
Raising Rams...................... 2-3 stage, double acting
Telescoping Ram................................(1) single stage

Power System
Engine...............................Caterpillar C-15/ Det S-60
Cylinders / Type........................................6 / 4-Stroke
Horsepower......................................................475 Hp
Governed Speed.........................................2,100 RPM
Air Cleaner...........................................Single Dry Type
Emergency Stop............................................Standard
Transmission
Type......................................Alison M5610-Drop Box
Gearing.....................................6 Forward / 1 Reverse

Air Electrical & Hydraulic
Compressor..................................................... 27 CFM
Electric System................................................. 12 Volt
Alternator......................................................115 amp
Starter.............................................................. 12 Volt
Batteries..................................................... (3) BCI-31
Hydraulic System......................... 50 gpm / 2,000 psi

Cab
Type................................. Single Person (R or L drive)
Heater/ Defroster......................................40,000 BTU
Drivers Seat.....................................................Air Ride
Mirrors...............................................West Coast Style

Rig Leveling System
Leveling Jacks.... (4) 12 in. Hyd. w/ Manual Back-up

Carrier
Type...............................................5 axle, 10 x 4 Drive
Length w/ Mast..........................................61 ft. 9 in.
Overhang, Front..........................................15 ft. 5 in.
Axle to Front Bumper............................................ 5 ft.
Bridge Span................................................14ft. 10 in.
Rear Axle Spacing.............................................. 55 in.
Rear Axle to Back of Rig..............................11 ft. 8 in.
Height (OTR)...............................................14 ft. 1 in.
Estimated Rig Weight................................90,140 lbs.

Axles-Suspension
Front..............................................Tandem/ Steerable
Axle Capacity...............................20,000 lbs. per axle
Suspension Type................................................Spring
Rear................................................................ Tandem
Axle Capacity.............................................23,000 lbs.
Tag Axle Capacity.......................................20,000 lbs.
Drive Ratio......................................................... 6.17:1
Brakes
ABS System.........................................Standard Drum
Park Brake...............................................................Air
Tires & Wheels
Front Tires........................................425/65 R22.5 in.
Wheels................................................13 in. / 22.5 in.
Rear Tires................................................ 11Rx 22.5 in.
Rear Wheels..........................................8 in. / 22.5 in.
Frame
Main Rails.........................................21 in. 53 lbs./ ft.
Frame Deck...........................3/16 in. Diamond Plate
Tow Points............................................... Front & Rear
Front Bumper.............................................. Slant Type
Paint
Standard Paint..........................2 Non-Metallic Colors

Download PDF file:
Service and Workover Unit TI-500