Unit TI-600 Service and Workover

Description
The TI-600 provides a standard hook load of 265,000 lbs. (74.8 MT), with a 112 ft. (34.1 M.) mast height. The heavy duty unit is specifically designed for drilling, workover, and service operations. The unit can be trailer mounted, but most TI-600’s are mounted on an integrated 5-axle off-road carrier with a single deck-mounted 550 Hp diesel engine and an automatic transmission. The TI-600 is offered with conventional band brakes or with full disc brakes, as well as a full complement of tools and additional equipment.

Drawworks
Model..........TI-260-154 (Disc) or DD42-160(Band)
Single Line Pull .........................................41,500 lbs.
Main Barrel Dimensions ................. 18.75 in. x 34 in.
Hoisting Drum Information
Wire Line Size.......................................................1 in.
Wire Line..........................................................675 ft.
Drum Clutch..........................................18 in. 3-Plate
Gearing....................................6 Forward / 1 Reverse
Drive Chain...............................................Double 160
Brake System...........Dual 60 in. disc / 42 x 12 blocks
Brake Cooling ............................................Air/ Splash
Assist Brake .................... Single 54 in. / Single 60 in.
Sand Drum Information
Sand Drum Diameter...................................12.75 in.
Standard Sand Line Size ................................9/16 in.
Sand Line (included)..................................16,000 ft.
Drive Chain................................................Single 140
Brake System.............Single 48 in. Disc/ 42x8 blocks
Brake Cooling ............................................ Air/Splash

Mast
Model...........................................................112/250
Mast Height ..................................................... 104 ft.
No. of Lines to the Block .............................. 4, 6, or 8
API Capacity ........................................... 265,000 lbs.
Drill Line Size........................................................1 in.
Racking Board Height............55 ft. 7 in. / 66 ft. 7 in.
Rod Basket Height......................................78 ft. 7 in.
Traveling Block...............150 ton 84A non-weighted
Mast Raising System
Raising Rams ..................... 2-3 stage, double acting
Telescoping Ram.............................. (1) Single Stage
Guy Lines........................(2) with Rachting Boomers
Wind Guys............................. (1) Set with Tail Chains
Tubing Board Guys................(1) Set with Tail Chains

Power System
Engine..............................Caterpillar C-15/ Det S-60
Cylinders / Type ....................................... 6 / 4-Stroke
Horsepower.....................................................550 Hp
Governed Speed........................................2,100 RPM
Air Cleaner..........................................Single Dry Type
Emergency Stop...........................................Standard
Transmission
Type ..................................... Alison M5610-Drop Box
Gearing....................................6 Forward / 1 Reverse

Air Electrical & Hydraulic
Compressor .................................................... 27 CFM
Electric System................................................12 Volt
Alternator.....................................................115 amp
Starter .............................................................12 Volt
Batteries .................................................... (3) BCI-31
Hydraulic System ........................ 50 gpm / 2,000 psi

Cab
Type ................................. Single Person(R or L drive)
Heater/ Defroster .....................................40,000 BTU
Drivers Seat ....................................................Air Ride
Mirrors..............................................West Coast Style

Rig Leveling System
Leveling Jacks ..........(4) 12 in. Hyd. w/ Manual lock
.............................................................(2) Screw Type

Carrier
Type..............................................5 axle, 10 x 4 Drive
Length w/ Mast .......................................... 61 ft 9 in.
Overhang, Front.........................................15 ft. 9 in.
Axle to Front Bumper........................................... 5 ft.
Bridge Span...............................................14ft. 10 in.
Rear Axle Spacing.............................................54 in.
Rear Axle to Back of Rig............................. 11 ft. 8 in.
Estimated Rig Weight ...............................90,940 lbs.

Axles-Suspension
Front .............................................Tandem/ Steerable
Axle Capacity ................................ 20,000 lb per axle
Suspension Type...............................................Spring
Rear ..............................Walking Beam w/ air pusher
Pusher Axle Capacity................................23,000 lbs.
Tag Axle Capacity......................................20,000 lbs.
Drive Ratio........................................................6.17:1
Brakes
ABS System........................................Standard Drum
Park Brake...............................................................Air
Tires & Wheels
Front Tires.......................................425/65 R22.5 in.
Wheels ...............................................13 in. / 22.5 in.
Rear Tires .............................................. 11R x 22.5 in.
Rear Wheels .........................................8 in. / 22.5 in.
Frame
Main Rails........................................21 in. 53 lbs. / ft.
Frame Deck..........................3/16 in. Diamond Plate
Tow Points..............................................Front & Rear
Front Bumper.............................................Slant Type
Paint
Standard Paint.........................2 Non-Metallic Colors

Download PDF file:
Service and Workover Unit TI-600